Asphalt Driveway Installation in Nashville and Middle Tennessee
Driveway Paving

Asphalt Driveway Installation

New asphalt driveways built right from the ground up: graded, drained, stone-based and paved in smooth, dense hot mix with clean edges.

A driveway is the first thing people see and the part of your property that takes the most abuse. A good asphalt driveway looks sharp from the day it is paved and keeps looking good because of what is underneath it. In Nashville, where red clay soil holds water and winter freeze and thaw cycles heave weak pavement, the base and drainage matter as much as the black surface on top.

We build new driveways in a clear order. We measure and mark the layout with you, excavate to the right depth, shape the grade so water leaves the pavement, compact a crushed stone base and then lay hot mix asphalt in a uniform layer, rolling it while it is still hot so it compacts tight. We finish the edges, clean up and explain how to care for it. The result is a smooth surface with no low spots, cleanly finished edges and a design that fits the house.

Layout and grade first

We walk the property with you, mark the width, curves and apron, and set a grade that sheds water away from the garage and house.

A compacted stone base

Crushed stone is spread in lifts and compacted until it is firm. A solid base is what keeps a driveway from rutting, sinking and cracking.

Dense hot mix, rolled hot

Asphalt is delivered hot, spread to a consistent depth and rolled before it cools, so it bonds and compacts into a durable surface.

Clean edges and cleanup

We trim and finish the edges, backfill the shoulder if needed and leave your property tidy, with simple care instructions for the first weeks.

What is included

  • Free estimate and site walk
  • Layout, grade and drainage plan
  • Excavation and stone base
  • Hot mix paving and rolling
  • Edge finishing and shoulder work
  • Cleanup and care instructions
Before and after

See the transformation.

Drag the handle to compare.

After: a driveway with a smooth, freshly paved black asphalt driveway with crisp edges and a neat grass borderBefore: a driveway with a bumpy, patchy gravel driveway with weeds and rutsBeforeAfter
Gravel driveway becomes smooth asphalt. From a bumpy, patchy gravel driveway with weeds and ruts to a smooth, freshly paved black asphalt driveway with crisp edges and a neat grass border.
Why it works

What you get with Driveway Installation

Built to fit

Width and curves planned.

Strong base

Compacted stone layer.

Drains properly

Water leaves the pavement.

Rolled dense

Compacted while hot.

Clean edges

Crisp, straight lines.

Care guidance

Simple first-weeks plan.

Try it now

Asphalt Paving Budget Planner

Pick a job, set the size and add extras to see a ballpark planning range for your asphalt project.

How it works

Our process, start to finish.

  1. 01

    Call and schedule

    You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.

  2. 02

    Visit and measure

    We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.

  3. 03

    Plan and estimate

    We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.

  4. 04

    Prepare the site

    We remove old pavement, grade, correct drainage and build a compacted stone base.

  5. 05

    Pave and finish

    Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.

  6. 06

    Walk and care

    We walk the finished pavement with you, explain curing and care and leave the site clean.

Questions

Driveway Installation FAQ

How thick should a driveway be?

Most home driveways use about two to three inches of compacted asphalt over a firm stone base, and heavier use calls for more.

How long before I can drive on it?

Light vehicles can usually use it after a day or two in mild weather. We give exact guidance on the day we finish.

Will water pool on my new driveway?

It should not. We set the grade and slope so water runs off, and we check low spots before we leave.

When should I sealcoat it?

Most new asphalt is best left to cure for several months to a year first. We explain the timing for your driveway.

Can you match my existing apron or walkway?

Yes. We plan the transitions to concrete, brick or an existing driveway so the edges meet cleanly.

Next step

Get your free Driveway Installation estimate.

Tell us about your project and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your paving project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate