
Chip seal, slurry seal and other surface treatments that renew rural lanes, long drives and roads at a lower cost than new asphalt.
Not every road needs a full asphalt overlay. For long driveways, farm lanes, subdivisions and low-traffic roads, surface treatments renew the pavement at a fraction of the price of repaving. Chip seal sprays hot asphalt binder, then covers it with a layer of crushed stone that is rolled in tight. The result is a tough, textured, weather-resistant surface with a rustic look. Slurry and micro surfacing, thin mixes of fine stone and emulsion, give a smoother finish. They suit different surfaces and budgets.
We look at your pavement’s condition and traffic, then recommend a treatment or tell you honestly that something else is wiser. Cracks and failed spots are repaired first. We apply the binder at a controlled rate, spread the stone evenly and roll it for a tight bond. After curing, we sweep off loose stone. We explain the temporary speed limit and sweeping that follows. Chip seal is a good fit for rural Middle Tennessee settings where texture and affordability matter.
It works well on sound pavement carrying light to moderate traffic, such as lanes, long drives and rural roads.
Hot binder is sprayed, stone is spread and rolled, and loose rock is swept after curing for a tight, durable surface.
Thin, smooth mixes of fine stone and emulsion suit neighborhood streets and driveways where a cleaner look is preferred.
Treatments protect sound pavement. Cracks, potholes and soft areas must be repaired beforehand for the treatment to last.
Drag the handle to compare.

BeforeAfterLess than repaving.
Textured surface.
Rural settings.
Better results.
Back in use soon.
Right treatment.
Every topic has its own page with what to expect and how we approach it.
Asphalt finishChip Seal and TanA rustic, textured surface of embedded stone in warm tan and brown tones, popular for long rural drives.Learn more
Asphalt finishRecycled MillingsA dark, tightly packed surface of reclaimed asphalt pieces with a natural, lightly textured appearance.Learn more
Topic guideSealcoating GuideWhat sealcoat does, when to apply the first coat, how often to repeat and when to skip it…Learn more Pick a job, set the size and add extras to see a ballpark planning range for your asphalt project.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
It suits long and rural driveways where a textured look is fine.
Some does at first. We sweep after curing.
Often several years, depending on traffic.
It is a little noisier because of the texture.
Usually not needed. We explain the options.
Rejuvenation and Fog SealingRestoring the binder in aging asphalt with rejuvenating sealers and light fog seals that slow raveling and extend…Explore
Long and Rural DrivewaysLong driveways and farm entrances built for distance, weight and weather, with culverts, ditches and a base that…Explore
Private Roads and Farm LanesPaved private roads, shared lanes and farm entrances built for traffic and weather, with drainage, shoulders and a…Explore
Driveway ResurfacingA fresh layer of asphalt over a sound driveway: smoother, blacker and watertight again, at a fraction of…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.