
Heavy-duty asphalt pads for RVs, campers, boats and trailers, built thick enough to resist the point loads of tongues and tires.
RVs, campers, boats and trailers are among the heaviest things most homeowners park, and they concentrate that weight on small tire patches and jack stands. A thin pad of asphalt will rut and crack under them, especially in a hot Nashville summer when pavement softens. A purpose-built pad is thicker, better supported and laid out so you can back in without damaging your lawn or your driveway.
We plan pads around what you own. We measure the length, width and turning needs, then build a stronger section with a deeper stone base and a thicker asphalt layer. We shape the surface to drain, add width for a ramp or a side walk-around and plan the entry so wheels cut the corner without breaking the edge. A neat gravel or turf border finishes the pad. Because heavy loads in summer can leave marks, we also talk about jack pads for long stays.
We measure your RV, boat or trailer, with room to open slides and walk around, and we lay out the pad so you can back in comfortably.
Point loads from tires and jacks need more support. We build a deeper base and a thicker asphalt layer for the parking area.
A wide, reinforced approach lets wheels turn without cutting the edge, so the pad and the lawn stay intact.
In summer, asphalt softens. For long stays, a board or plate under a jack spreads the weight and protects the surface.
Drag the handle to compare.

BeforeAfterHeavy-duty section.
Room to walk around.
Supports point loads.
Edges protected.
Jack pad advice.
No standing water.
Every topic has its own page with what to expect and how we approach it.
Asphalt finishFresh Black AsphaltDeep, uniform black with a tight surface: the crisp new-pavement look that makes landscaping and brick pop.Learn more
Topic guideThickness and LayersHow many inches of asphalt and stone a driveway, lot or truck court really needs, and what each…Learn more
Topic guideEdges and BordersNatural edges, curbs, brick and concrete borders, turf and gravel shoulders compared by cost, strength and look.Learn more Pick a job, set the size and add extras to see a ballpark planning range for your asphalt project.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
Thicker than a normal driveway, often with three inches or more of asphalt over a deeper base. We size it to your weight.
Long stays in hot weather can leave marks. A jack pad and moving the rig now and then help.
Yes, with a planned entry from the driveway or street.
Utilities are planned with your electrician or plumber. We leave room for lines.
Gravel costs less to start, but asphalt is cleaner, easier to maintain and does not rut as easily.
Garage and Carport PadsFlat, well-drained asphalt pads for garages, workshops, carports and storage buildings, built to carry the load and shed…Explore
Extensions and WideningAdding width, a turnaround or extra parking to an existing driveway and joining the new asphalt cleanly to…Explore
Driveway InstallationNew asphalt driveways built right from the ground up: graded, drained, stone-based and paved in smooth, dense hot…Explore
Stone Base and Subgrade PreparationThe hidden half of every paving job: compacted crushed stone laid in lifts over a stable subgrade so…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.