Asphalt Tonnage and Area Calculator
Free asphalt paving tool

Asphalt Tonnage and Area Calculator

Enter length, width, thickness and base depth to see tons of asphalt, tons of stone, truckloads and a planning range.

These tools give planning-level estimates from typical values and the details you enter. They are not quotes, designs or engineering, and results depend on your actual site, soil, drainage, existing base, availability and local rules. Only a site visit can confirm what a project needs, and we give you an itemized written estimate before any work begins.

How it works

Four quick steps.

  1. 01

    Measure the area

    Enter the length and average width of each area.

  2. 02

    Set the layers

    Choose asphalt thickness and stone base depth.

  3. 03

    Pick the traffic

    Cars, light commercial or heavy trucks.

  4. 04

    Read the result

    See tons, truckloads, a thickness check and a planning range.

Tips

  • Measure along the centerline and add aprons and pads as a second area.
  • Rule of thumb: about 110 pounds of asphalt per square yard for each inch.
  • Your contractor confirms tonnage with the plant.
Questions

About this tool.

How accurate is the tonnage?

It is an estimate. Thickness variation, waste and base conditions change the real number, so your contractor confirms it.

Why add waste?

Curves, tie-ins and hand work use extra material.

What thickness should I use?

The tool flags a thin section for your traffic. Most driveways use two to three inches.

Free estimate

Ready for pavement that holds up?

Call us and we will visit your property, measure, check the base and drainage and give you an itemized written estimate.

Call NowFree Estimate