
Adding width, a turnaround or extra parking to an existing driveway and joining the new asphalt cleanly to the old.
Families grow, cars multiply and a driveway that once fit one car now needs to fit three. Widening or extending a driveway is one of the most practical upgrades for a home, and it is also one of the trickiest to make look right, because new pavement has to meet old pavement without a visible seam, a dip or a crack waiting to form. In Nashville neighborhoods with narrow lots and older driveways, careful planning makes the difference.
We start by measuring what you want and checking setbacks, drainage and utility locations. We cut a clean straight edge on the existing asphalt, prepare the new area with a compacted stone base and pave the addition so the surfaces meet at the same level. The joint is sealed so water does not creep in. Because new asphalt looks darker than old, we also talk about sealcoating the whole driveway later so it blends.
We check how much width you need, how cars will turn and where water will go, and we confirm setback and permit rules where they apply.
The existing edge is saw cut straight and tacked so the new asphalt bonds to it. A neat joint is sealed to resist water and cracking.
Added areas get the same base work as a new driveway, so the extension is as strong as the original, not weaker.
Fresh asphalt starts darker than old pavement. Sealcoating the whole driveway after it cures brings everything to one uniform color.
Drag the handle to compare.

BeforeAfterParking and turnaround.
Same as the original.
Cleanly joined.
No new puddles.
Seal to match.
Setbacks and permits.
Every topic has its own page with what to expect and how we approach it.
Asphalt finishFresh Black AsphaltDeep, uniform black with a tight surface: the crisp new-pavement look that makes landscaping and brick pop.Learn more
Asphalt finishSealcoated Charcoal FinishA rich, uniform charcoal-black coat that protects the surface and brings tired pavement back to life.Learn more
Topic guideDrainage and SlopeHow much slope a driveway needs, where water should go and how to solve puddles, runoff and washouts.Learn more Pick a job, set the size and add extras to see a ballpark planning range for your asphalt project.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
It starts darker and fades toward the old color. Sealcoating the whole driveway makes it uniform.
Many cities have width and setback rules. We help you check them before work begins.
Yes. A turnaround or hammerhead can be added in the same project.
A properly cut, tacked and sealed joint resists cracking well, and we seal it.
We can resurface or replace the whole driveway at the same time so everything matches.
Driveway InstallationNew asphalt driveways built right from the ground up: graded, drained, stone-based and paved in smooth, dense hot…Explore
Driveway SealcoatingA protective sealcoat that shields asphalt from sun, water and oil, restoring a deep black finish and slowing…Explore
Circular and Curved DrivewaysGraceful curves, circles and turnarounds paved smooth and consistent, with lines that follow the landscape and drain properly.Explore
RV, Boat and Trailer PadsHeavy-duty asphalt pads for RVs, campers, boats and trailers, built thick enough to resist the point loads of…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.