
Removing the top layer of worn pavement to a precise depth so new asphalt can be placed without raising grade or hitting curbs and doors.
Laying new asphalt on top of old raises the surface. That is a problem where the pavement meets a garage door, a curb, a drain or a building entrance. Milling solves it by grinding off the damaged top layer to a set depth first, so the new surface lands at the right height. It also removes ruts, waves and cracked surfaces that would otherwise reflect through a new overlay. The milled material is recycled, which keeps it out of the landfill and saves on stone.
Our milling machines cut to a precise depth, often one to two inches, and leave a rough texture that new asphalt bonds to well. We mill whole areas or just edges, trenches and bad patches. We sweep the area clean, tack the surface and pave the new layer. Milled asphalt can also be reused as a driveway surface, base material or farm lane topping. Milling is common for parking lot overlays, driveways with curbs and roads with drainage problems.
Removing the top layer keeps the new surface at the right height at doors, curbs, drains and tie-ins.
Milling removes distortions that would show through a thin overlay and reflect cracks into the new surface.
Milling machines cut to a set depth across the area, which gives a consistent surface for paving.
Milled asphalt is reused for base, driveways and lanes, reducing waste and material costs.
Drag the handle to compare.

BeforeAfterEven cut.
Doors and curbs.
Less waste.
Removes distortions.
Or reuse on site.
Textured surface.
Every topic has its own page with what to expect and how we approach it.
Asphalt finishRecycled MillingsA dark, tightly packed surface of reclaimed asphalt pieces with a natural, lightly textured appearance.Learn more
Asphalt finishAged Gray AsphaltWhat sun-faded gray asphalt tells you about its age, and what to do about it: sealcoat, repair or…Learn more
Topic guideThickness and LayersHow many inches of asphalt and stone a driveway, lot or truck court really needs, and what each…Learn more Pick a job, set the size and add extras to see a ballpark planning range for your asphalt project.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
Usually one to two inches, depending on the project.
When height matters or the surface is badly worn, yes.
They are reused as base, drive surface or hauled for recycling.
Yes. We mill edges, trenches and bad spots.
It is loud for a short time. We work to a schedule and notify neighbors on request.
Driveway ResurfacingA fresh layer of asphalt over a sound driveway: smoother, blacker and watertight again, at a fraction of…Explore
Lot Resurfacing and OverlaysMilling and new asphalt over sound lots: a smooth, uniform surface that looks new and extends the life…Explore
Asphalt Removal and HaulingBreaking out and hauling away old asphalt so the site is ready for a fresh start, with clean…Explore
Recycled Millings DrivewaysA tough, budget-friendly driveway or lane made from recycled asphalt millings that pack down into a firm, dark…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.