
Patches that last: squared-off, base-repaired and compacted, so repaired areas are flush and blend into the surrounding pavement.
Patching is the workhorse of pavement repair. It handles broken areas, sunken spots, utility cuts, edge failures and worn sections without replacing a whole surface. A good patch looks tidy, sits flush with the old pavement and lasts for years. A bad patch is lumpy, dips or rises and falls apart quickly. The difference is almost entirely in the preparation and the compaction, and we put our time there.
We outline the damaged area with a margin of sound pavement, cut or mill it square and remove the failed material. We check the base and repair it if needed. We tack the edges and place hot mix in lifts, compacting each with a plate or roller, and finish flush with the surrounding surface. Edge sealing keeps water out. Skin patches, which are shallow patches over worn areas, are also available when the base is sound and the problem is only on the surface.
Patches are cut square into sound pavement, which gives the new asphalt solid edges to bond with.
If the failure goes deeper than the surface, we dig out and replace the soft base, so the patch does not settle.
Hot mix is placed in compacted lifts and finished flush, which prevents lumps, dips and early failure.
When only the surface is worn and the base is sound, a shallow skin patch is a cost-effective fix.
Drag the handle to compare.

BeforeAfterCut, repaired, compacted.
No lumps or dips.
No settling.
Dense and strong.
Water kept out.
Neat appearance.
Every topic has its own page with what to expect and how we approach it.
Topic guideCrack Types GuideHairline, linear, alligator, block, edge and slippage cracks explained: what causes each, how serious it is and how…Learn more
Asphalt finishAged Gray AsphaltWhat sun-faded gray asphalt tells you about its age, and what to do about it: sealcoat, repair or…Learn more
Asphalt finishFresh Black AsphaltDeep, uniform black with a tight surface: the crisp new-pavement look that makes landscaping and brick pop.Learn more Tick what you see on your pavement and get a priority list and a plain recommendation: maintain, repair, resurface or replace.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
It starts darker and fades. Sealcoating the whole surface evens it out.
From a small spot to large sections of a lot or driveway.
A properly built patch lasts for years.
A shallow patch over worn surface asphalt where the base is sound.
We can place temporary patches in winter and return for permanent ones in warmer weather.
Pothole RepairPermanent pothole repair that cuts out the failed area, rebuilds what is underneath and fills it with compacted…Explore
Full-Depth RepairRemoving failed asphalt and base completely and rebuilding the whole section, for areas where the foundation has given…Explore
Utility Cut and Trench RepairRestoring pavement after water, sewer, gas, electric or fiber work, with compacted backfill and flush, watertight patches.Explore
Driveway ResurfacingA fresh layer of asphalt over a sound driveway: smoother, blacker and watertight again, at a fraction of…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.