
Protective sealcoat for commercial lots that fights sun, water, oil and salt, keeps pavement dark and extends its life between repaves.
The most affordable way to extend the life of a parking lot is to protect it before it needs repair. Sealcoating coats the surface with a protective emulsion that slows oxidation, blocks water, resists oil and fuel drips and brings back a rich black that makes a property look cared for. For a Nashville retail center, apartment complex or office park, a well-timed sealcoat can add years to the pavement and keep repaving off the budget a little longer.
Preparation decides the result. We sweep and blow the lot clean, wash off oil spots and treat them with a primer, fill cracks with hot rubberized sealant and then apply sealer in even coats with a spray rig or squeegee, edging by hand along curbs and walls. Because sealcoating means closing parts of the lot, we plan the work in sections and in off-peak hours. After the sealer cures, we restripe the lot so it is ready for customers.
We clean, wash and treat oil spots and fill cracks first. Sealer only works over a clean, sound surface.
Spray or squeegee application gives a uniform coat, and hand edging keeps lines neat along curbs, islands and buildings.
We split the lot into sections and work during quiet hours, with cones and barriers to keep cars off wet areas.
Once the sealer cures, new stall lines, symbols and arrows finish the lot and make it look new.
Drag the handle to compare.

BeforeAfterWater, sun and oil.
Restores curb appeal.
Before coating.
Off-peak hours.
Completes the job.
Delays repaving.
Every topic has its own page with what to expect and how we approach it.
Topic guideSealcoating GuideWhat sealcoat does, when to apply the first coat, how often to repeat and when to skip it…Learn more
Asphalt finishSealcoated Charcoal FinishA rich, uniform charcoal-black coat that protects the surface and brings tired pavement back to life.Learn more
Asphalt finishStriped and Marked LotsCrisp white and yellow lines, arrows, symbols and curb paint that turn bare pavement into a clear, organized…Learn more Enter your surface, age, condition and area to see when to sealcoat, how much sealer you need and what to repair first.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
Many lots benefit every two to four years, depending on traffic and sun.
No. Damaged areas need repair first. Sealcoat protects sound pavement.
Sections are closed for a day or so, depending on weather and sealer.
Yes, after the sealer has cured.
Often yes. We plan around your busiest hours.
Crack SealingHot rubberized sealant that fills and seals cracks before water gets in and turns a hairline into a…Explore
Striping and MarkingCrisp stall lines, arrows, fire lanes, crosswalks and symbols laid out accurately and painted to last.Explore
Pavement Maintenance ProgramsA simple multi-year schedule of crack sealing, sealcoating, patching and striping that stretches the life of your pavement…Explore
Rejuvenation and Fog SealingRestoring the binder in aging asphalt with rejuvenating sealers and light fog seals that slow raveling and extend…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.