
Flat, well-drained asphalt pads for garages, workshops, carports and storage buildings, built to carry the load and shed water.
A detached garage, a workshop or a carport needs a dependable place to sit and a clean approach. An asphalt pad gives you a firm, level apron in front of the building, a smooth place to work on a vehicle and a surface that keeps mud out of the garage. In Nashville, with its clay soils and frequent rain, a properly built pad also keeps water from running into the building.
We build pads with the same care as a driveway. We set the slope away from the door, excavate and compact a stone base, and pave the pad at a thickness that matches the use, thicker if you park a heavy truck or equipment there. We plan how the pad meets the building and the existing driveway, and we leave a clean edge that sheds water. Lawn tractors, trailers and storage racks all work better on a flat surface.
The pad is graded so water leaves the doorway and runs to the lawn or a drain, instead of entering the garage.
Stone base depth and asphalt thickness are chosen for what will sit on it, from cars to trailers to equipment.
We plan the pad so it meets the driveway and the building threshold neatly, without a lip or a low spot.
Extra width beside a workshop door, a turn-around spot or a wash area can be built into the pad.
Drag the handle to compare.

BeforeAfterFlat and firm.
Away from the door.
Carries load.
Room to work.
No lip.
Cleaner garage.
Every topic has its own page with what to expect and how we approach it.
Asphalt finishFresh Black AsphaltDeep, uniform black with a tight surface: the crisp new-pavement look that makes landscaping and brick pop.Learn more
Topic guideDrainage and SlopeHow much slope a driveway needs, where water should go and how to solve puddles, runoff and washouts.Learn more
Topic guideThickness and LayersHow many inches of asphalt and stone a driveway, lot or truck court really needs, and what each…Learn more Pick a job, set the size and add extras to see a ballpark planning range for your asphalt project.
You tell us about your pavement and what you want to change, from a repair to a whole new lot, and we set a visit that fits your day.
We visit, measure, check slope, drainage and the existing base and talk through thickness, edges, borders and finishes.
We plan the layout and drainage and give you an itemized written estimate with options, so you can compare it with any other bid.
We remove old pavement, grade, correct drainage and build a compacted stone base.
Hot mix is placed and compacted, edges are finished and striping, borders or sealing are completed.
We walk the finished pavement with you, explain curing and care and leave the site clean.
Yes. We coordinate with your builder so the pad meets the slab at the right height.
Two to three inches for cars, and thicker for heavy trucks or equipment.
Not if the pad is graded correctly. We design the slope away from the door.
Yes, including the area under it.
Yes. We join it so it matches and drains.
Driveway InstallationNew asphalt driveways built right from the ground up: graded, drained, stone-based and paved in smooth, dense hot…Explore
RV, Boat and Trailer PadsHeavy-duty asphalt pads for RVs, campers, boats and trailers, built thick enough to resist the point loads of…Explore
Stone Base and Subgrade PreparationThe hidden half of every paving job: compacted crushed stone laid in lifts over a stable subgrade so…Explore
Concrete Aprons and TransitionsConcrete driveway aprons, curb cuts and transition strips that protect asphalt edges where it meets the street, garage…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.